The Kidde DETECT hardwired combination smoke and carbon monoxide alarm provides photoelectric smoke detection and electrochemical CO sensing in one device for residential living spaces. A 120 V AC connection with two included AA backup batteries maintains detection during short-term power outages, while voice alerts identify the hazard and compatible wired interconnection helps alert occupants throughout the home.

Key Features

  • Dual-Hazard Detection: Photoelectric smoke and electrochemical CO sensors monitor both hazards in a single ceiling- or wall-mounted alarm.
  • Hardwired Power with AA Backup: Two included replaceable AA batteries support continued detection during short-term power outages.
  • English and French Voice Alerts: Spoken messages identify why the alarm is sounding, helping occupants distinguish smoke from carbon monoxide events.
  • Compatible Kidde Interconnection: Connect up to 24 compatible Kidde devices so interconnected alarms sound together, subject to the device limits and compatibility requirements in the user guide.
  • Reduced Cooking Nuisance Alarms: Enhanced sensing technology reduces false alarms often caused by cooking, and HUSH temporarily silences a nuisance smoke alarm for approximately 8–10 minutes.
  • Installer-Friendly Connections: A plug-in quick connector and included twist-and-click mounting bracket simplify fitting the alarm to a suitable junction box.

Specifications

Brand / Series Kidde DETECT
Product Type Combination smoke and carbon monoxide alarm
Smoke Sensor Photoelectric
CO Sensor Electrochemical
Electrical Supply 120 V AC, 60 Hz, 42 mA maximum
Backup Batteries Two replaceable AA batteries, included. Replace every 6 months or when the low-battery chirp sounds. Approved replacements: Energizer E91, Gold Peak 15A or Golden Power GLR6A. Do not use lithium batteries.
Audible Alarm 85 dB at 3 m (10 ft), with English and French voice alerts
Interconnection Up to 24 compatible Kidde devices, with no more than 18 initiating devices, including a maximum of 12 smoke alarms; the remaining 6 devices may be strobe lights and/or relay modules. Maximum interconnect wiring length: 305 m (1,000 ft). Consult the user guide for compatible alarms. Not designed for interconnection with other manufacturers’ products unless otherwise specified.
HUSH Function Temporarily silences a nuisance smoke alarm for approximately 8–10 minutes, then automatically resets
Testing / Replacement Reminder Internal self-testing does not replace manual testing. Perform a button test weekly. End-of-life notification indicates replacement 10 years after initial power-up.
Operating Temperature 4.4°C to 37.8°C (40°F to 100°F)
Operating Humidity 10–95% relative humidity, non-condensing
Product Size 12.7 × 5.1 × 12.7 cm
Product Weight 0.39 kg
Installation Wall or ceiling mounting on a CSA-listed or recognised junction box, following manufacturer placement guidelines. Connections must be made by a qualified electrician in accordance with applicable codes. Alarms must share a continuous, non-switched power line that is not protected by a ground fault interrupter.
Warranty 10-year limited warranty, batteries excluded
Use Restrictions For ordinary indoor locations in family living units. Not designed to measure compliance with commercial or industrial standards, and not suitable for hazardous locations. Designed to protect against acute CO exposure; it will not fully safeguard individuals with specific medical conditions. Consult a medical practitioner if in doubt.